![]() ![]() MODE: DATA-USB (NOT USB), choose the DATA-USB setting. These are the settings on the main screen of the FT-991 that I adjusted. I use 4800 and it works fine.) 032 CAT TOT 100ms 033 CAT ENABLE 062 Data Mode OTHERS (NOT PSK – change to OTHERS) 064 OTHER DISP (SSB) = 1500 Hz 065 OTHER SHIFT (SSB) = 1500 Hz 066 DATA LCUT FRED = OFF 068 DATA HCUT FREQ = OFF 070 DATA IN SELECT = REAR 071 DATA PTT SELECT = RTS 072 DATA PORT SELECT = USB 031 CAT RATE 4800 (or faster – just make sure the software and radio match the same CAT RATE many are using the fastest “38XXX” vale. These are the MENU settings that I changed from the default values. Yaesu FT-991 MENU SETUP: (If you have a 991(A), your menu numbers will be slightly off, just go by the menu name)ĭO this before trying to configure the WSJT-X or any other software on the computer. After this section, I will put in the additional updated info for the 991A he included. I looked up the article again and here are the settings he recommended for the radio.are these same or similar to your radio settings now? Note these are 991 not 991A settings. If could leave those the same and only change the software to make it all work, that would be great. If you don't mind can you give us your MENU settings on your rig for the area around 31-? and 60's-84? (sorry I don't have the N1AV article in front of me to give you specific radio settings. ![]() Do you let the N3FJP software control the radio or the Omrig? My original understanding is when I hit the A>M button after i set things up was ALL the settings were remembered for that freq.turns out that wasn't true as I found out when after the RTTY RU, I tried to send a VARA FM and it didn't work. Thank you very much for sharing your idea and it would nice to know the specifics of how you have what software control the radio and the N3FJP software. If not, I'm going to try your suggestion. I'm hoping I can get the Win4Yaesu software to work. One day I will actually know what I'm doing and be at a level as you. Only got it in October 2020 and am getting more comfortable each day using all the varied settings (still not understanding what each setting actually does.just "doing what i was told" by articles telling me what settings should be. I heard from other Hams using Win4Yaesu Suite (gives me virtual Com ports similar to the Omrig) to do similar to what you are doing and I was going to try that this weekend. I don't like my solution at all, using RTSystems, but wanted to only use the USB cable as described by N1AV article. Pablo, I'm very interested in what you are saying.sounds like the best of all worlds. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |